The Package Contents
Inside this small box lies the Beta 65S drone, a brush hoop mini drone with a 65 mm wheelbase. This product by Betafpv comes in two versions: the Racing version and the HFF version. The main difference between the two lies in the motor and propeller specifications. The HFF version features a lower KV value motor and propeller, while the Racing version boasts a higher KV value and propeller comparison. The accessories included in the package are a set of propellers, a parameter adjustment line, spare screws, and a camera stand/hood.
The Design and Build
Upon holding the Beta 65S drone, the first impression is its incredibly lightweight nature. It has a simple, clean, and exquisite design. The 65 mm wheelbase drone shares a similar frame design with previous models. The standout feature is the semi-circular buckle on the cover, leaving the drone essentially naked but with a unique accessory attachment. This design ensures the drone remains lightweight, although it exposes the entire board, making it vulnerable to external elements like dew when flying outdoors.
Overall Impression
Despite the slightly exposed design, the Beta 65S Air drone impresses with its minimalistic and lightweight build. The simplicity and elegance of the design contribute to its agility and efficiency during flights. While caution is advised when flying in outdoor environments due to the exposed board, the drone’s performance and maneuverability make it a popular choice among FPV enthusiasts looking for a lightweight and high-performing drone.
Redesigned Camera Holder
The current version of this camera holder should be redesigned and the old version should look like this. There is no such triangular opening. There is no such strengthening rib at the back. The new version is definitely more resistant to Flying and the toughness will be better. The adjustment of his camera is also very interesting, adjust a screw hole to control this angle of the raising of this camera.
Small Brush Motor
The racing version uses a particularly small coreless brush motor of 19000 kilov volts. Look at this comparison with a little finger. Can you see it’s such a delicate little guy and then we looked at the hardware.
Main Control Board
His main control board board is a 4 in 1 main control board. As you can see, the receiver is actually outside the version of the receiver Ls a versatiles own light. The main board has integrated for function, ESC, flag control, OSD image transmission, but, unlike the masterboard werere familiar with it before its quite a triangle, normally we should have a cross layout and a square main board. I dont know what consideration this is in. Of course, that is to integrate this receiver on the board. The weight doesn’t seem to make much difference. Maybe this board will be near for a friend in need. Of course, if you still use the knowledge of Black Sheep, then this is a version that can be exchanged for the timer. It should be that everyone will choose it. If everyone uses Ls, then this version should be better.
Camera and Hardware Configuration
Then the camera uses one of picked its own cameras. You can see this picture transfer. It should be in this part because this pigtail antenna came out of the trial here and then on the bottom. There is a modified plug for a battery. This will prevent the cable from breaking when we plug it back and forth, so it’s a 180 line right now in terms of Hardware, the main control uses asmg for 73 as a main chip, then the gyroscope added, with a version of the firmware of BF for 0.5, so these three things together the hardware configuration of this should be a big upgrade than the older drone itself.
Accessories and Battery Options
Well, if everyone says that the Drone blows up, this accessory must be a necessity, including this rack, and a propeller of the 1 to one 9s in various colors are available. It should look like this. This is a three load propeller with this little guy and protect latest power battery. In fact, compared to the previous Blue version, it should be a big upgrade in the discharge rate. This considered a high performance version. There are two types in total: one is 260 mamp H and the other is 300 milliamp. H, 260 battery will be lighter it better for this drone. If you want to fly long use 300 milliamp hours just choose this according to your actual situation.
Pricing
After that, talking about the price of this little drone version without these accessories, the price is 93.
The Affordability Factor
In this class of drone, the price of the BETAFPV 65S AIR is incredibly affordable. The advantage of this drone lies in its well-balanced design that ensures a smooth and stable flight experience. While it may not be the most aggressive flyer in terms of parameters, its stability is commendable.
Superior Build Quality
One of the key highlights of the BETAFPV 65S AIR is its impeccable build quality. From the frame to the components above, everything is meticulously designed to provide a seamless flying experience. This attention to detail not only enhances the drone’s durability but also contributes to its overall performance.
Impressive Stability
Despite not being the fastest or most extreme drone in its class, the BETAFPV 65S AIR excels in stability. This makes it a great choice for those looking for a reliable and easy-to-control FPV drone. Whether you are a beginner or a seasoned pilot, this drone offers a flight experience that is both enjoyable and predictable.
Conclusion
As we prepare to take the BETAFPV 65S AIR for a spin in our upcoming video, it is evident that this drone is a well-rounded performer. Its affordability, build quality, and stability make it a compelling choice for anyone in the market for a lightweight FPV drone. Stay tuned for our detailed review of its actual performance, and don’t forget to like, share, and subscribe if you enjoyed this unboxing experience!
